Amazon PAS-C01 Question Answers

Question # 21

A company is running SAP on anyDB at a remote location that has slow and inconsistent internet connectivity. The company wants to migrate its system to AWS and wants to convert its database to SAP HANA during this process Because of the inconsistent internet connection the company has not established connectivity between the remote location and the company's VPC in the AWS Cloud.   How should the company perform this migration?   

A. Migrate by using SAP HANA system replication over the internet connection Specify a public IP address on the target system   
B. Migrate by using SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move Use an AWS Snowball Edge Storage Optimized device to transfer me SAP export files to AWS   
C. Migrate by using SAP HANA system replication with initialization through backup and restore Use an AWS Snowball Edge Storage Optimized device to transfer the SAP export files to AWS   
D. Migrate by using SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move Use Amazon Elastic File System (Amazon EPS) to transfer the SAP export files to AWS  

Show / Hide Answer

---

Question # 22

A company hosts an SAP HANA database on an Amazon EC2 instance in the us-easi-1 Region. The company needs to implement a disaster recovery (DR) site in the us-west-1 Region. The company needs a cost-optimized solution that offers a guaranteed capacity reservation an RPO of less than 30 minutes and an RTO of less than 30 minutes.   When solution will meet these requirements?   

A. Deploy a single EC2 instance to support the secondary database in us-west with additional storage Use this secondary database instance to support QA and production Configure the primary SAP HANA database in us-east-1 to constantly replicate the data to the secondary SAP HANA database in us-west-t by using SAP HANA system replication with preload off During DR shut down the QA SAP HANA instance and restart the production services at the secondary site   
B. Deploy a secondary staging server on an EC2 instance in us-west-1 Use CloudEndure Disaster Recovery to replicate changes at the database level from us-east-1 to the secondary staging server on an ongoing basis During DR, initiate cutover increase the size of the secondary EC2 instance to match the primary EC2 instance and start the secondary EC2 instance  
C. Set up the primary SAP HANA database in us-east-1 to constantly replicate the data to a secondary SAP HANA database in us-west-1 by using SAP HANA system replication with preload on Keep the secondary SAP HANA instance as a hot standby that rs ready to take over in case of failure   
D. Create an SAP HANA database AMI by using Amazon Elastic Block Store (Amazon EBS) snapshots Replicate the database and log backup files from a primary Amazon S3 bucket in us-east-1 to a secondary S3 bucket m us-west-1 During DR launch the EC2 instance in us-west-1 based on AMIs that are replicated Update host information Download database and log backups from the secondary S3 bucket Perform a point-in-time recovery  

Show / Hide Answer

---

Question # 23

A company is planning to migrate its SAP workloads to AWS. The company will use two VPCs One VPC will be for production systems and one VPC will be for non-production systems. The company will host the non-production systems and the primary node of all the production systems in the same Availability Zone.   What is the MOST cost-effective way to establish a connection between me production systems and the non-production systems?  

 A. Create an AWS Transit Gateway Attach the VPCs to the transit gateway Add the appropriate routes m the subnet route tables   
B. Establish a VPC peering connection between the two VPCs Add the appropriate routes in the subnet route tables   
C. Create an internet gateway in each VPC Use an AWS Site-to-Site VPN connection between the two VPCs Add the appropriate routes in the subnet route tables  
 D. Set up an AWS Direct Connect connection between the two VPCs Add the appropriate routes in the subnet route tables   

Show / Hide Answer

---

Question # 24

A company is planning to migrate its on-premises SAP ERP Central Component (SAP ECC) system on SAP HANA to AWS Each month the system experiences two peaks in usage. The first peak is on the 21st day of the month when the company runs payroll. The second peak is on the last day of the month when the company processes and exports credit data Both peak workloads are of high importance and cannot be rescheduled   The current SAP ECC system has six application servers an of a similar size. During normal operation outside of peak usage four application servers would suffice   Which purchasing option will meet the company's requirements MOST cost-effectively on AWS?   

A. Four Reserved Instances and two Spot Instances
B. Six On-Demand Instances   
C. Six Reserved Instances   
D. Four Reserved Instances and two On-Demand Instances  

Show / Hide Answer

---

Question # 25

A company needs to implement high availability for its SAP S 4HANA system on AWS The company will use a SUSE Linux Enterprise Server clustering solution in private subnets across two Availability Zones An SAP solutions architect must ensure that the solution can route traffic to the active SAP instance m this clustered configuration.   What should the SAP solutions architect do to meet these requirements?  

A. Implement the SAP cluster solution by using a secondary private IP address Reassign the secondary private IP address from one network interface to another network interface in the event of any failure that affects the primary instance.  
 B. Implement the SAP cluster solution by using an Elastic IP address Mask the failure of an instance or software by rapidly remapping the address to another instance in the account   
C. Implement the SAP duster solution by using a public IP address Use this public IP address for communication between the instances and the internet   
D. implement the SAP duster solution by using an overlay IP address that is outside the CIDR block of the VPC Use overlay IP address routing to dynamically update the route table to point to the active node and provide external access by using a Network Load Balancer or AWS Transit Gateway.  

Show / Hide Answer

---

Question # 26

A company is planning to migrate its on-premises SAP application to AWS. The application runs on VMware vSphere The SAP ERP Central Component (SAP ECC) server runs on an IBM Db2 database that is 2 TB m size The company wants to migrate the database to SAP HANA   Which migration strategy will meet these requirements'?

A. Use AWS Application Migration Service (CloudEndure Migration)   
B. Use SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move   
C. Use AWS Server Migration Service (AWS SMS)   
D. Use AWS Database Migration Service (AWS DMS)  

Show / Hide Answer

---

Question # 27

A company wants to migrate its SAP workloads to AWS from another cloud provider. The company's landscape consists of SAP S 4HANA SAP BWMHANA SAP Solution Manager and SAP Web Dispatcher SAP Solution Manager 15 running on SAP NANA   The company wants 10 change the operating system from SUSE Linux Enterprise Server to Red Hat Enterprise Linux as a pan of this migration. The company needs a solution that results in the least possible downtime for the SAP SMHANA and SAP BW 4HANA systems.   Which migration solution will meet these requirements?

A. Use SAP Software Provisioning Manager to perform a system export/import for SAP S/4HANA SAP BW.4HANA SAP Solution Manager and SAP Web Dispatcher   
B. Use backup and restore tor SAP S'4HANA. SAP BW4HANA and SAP Solution Manager Reinstall SAP Web Dispatcher on AWS with the necessary configuration   
C. Use backup and restore for SAP S’4 HAN A and SAP BW 4HANA Use SAP Software Provisioning Manager to perform a system export import for SAP Solution Manager Reinstall SAP Web Dispatcher on AWS with the necessary configuration.   
D. Use SAP HANA system replication to replicate the data between the source system and the target AWS system for SAP S 4HANA and SAP BW 4HANA Use SAP Software Provisioning Manager to perform a system export import for SAP Solution Manager Reinstall SAP Web Dispatcher on AWS with the necessary configuration  

Show / Hide Answer

---

Question # 28

A company hosts its SAP NetWeaver workload on SAP HANA m the AWS Cloud The SAP NetWeaver application is protected by a cluster solution that uses Red Hat Enterprise Linux High Availability Add-On The duster solution uses an overlay IP address to ensure that the high availability cluster is still accessible during failover scenarios.   An SAP solutions architect needs to facilitate the network connection to this overlay IP address from multiple locations These locations include more than 25 VPCs other AWS Regions and the on-premises environment The company already has set up an AWS Direct Connect connection between the on-premises environment and AWS What should the SAP solutions architect do to meet these requirements in the MOST scalable manner?

A. Use VPC peering between the VPCs to route traffic between them   
B. Use AWS Transit Gateway to connect the VPCs and on-premises networks together   
C. Use a Network Load Balancer to route connections to various targets within VPCs   
D.      Deploy a Direct Connect gateway to connect the Direct Connect connection over a private VIF to one or more VPCs in any accounts  

Show / Hide Answer

---

Question # 29

A company has deployed a highly available SAP NetWeaver system on SAP HANA into a VPC The system is distributed across multiple Availability Zones within a single AWS Region SAP NetWeaver is running on SUSE Linux Enterprise Server for SAP SUSE Linux Enterprise High Availability Extension is configured to protect SAP ASCS and ERS instances and uses the overlay IP address concept The SAP shared dies sapmnt and . usrsap. trans are hosted on an Amazon Elastic File System (Amazon EFS) tile system   The company needs a solution that uses already-existing private connectivity to the VPC. The SAP NetWeaver system must be accessible through the SAP GUI client tool.   Which solutions will meet these requirements? (Select TWO)

A. Deploy an Application Load Balancer Configure the overlay IP address as a target   
B. Deploy a Network Load Balancer Configure the overlay IP address as a target   
C. Use an Amazon Route 53 private zone Create an A record that has the overlay IP address as a target   
D. Use AWS Transit Gateway Configure the overlay IP address as a static route in the transit gateway route table Specify the VPC as a target  
 E. Use a NAT gateway Configure the overlay IP address as a target   

Show / Hide Answer

---

Question # 30

A company is hosting an SAP HANA database on AWS. The company is automating operational tasks including backup and system refreshes. The company wants to use SAP HANA Studio to perform data backup of an SAP HANA tenant database to a backint interface. The SAP HANA database is running in multi-tenant database container (MDO mode. The company receives the following error message during an attempt to perform the backup.  


What should an SAP solutions architect do to resolve this issue?

A. Set the execute permission for AWS Backint agent binary aws-backint-agent and for the launcher script aws-backint-agent-launcher sh in the installation directory
B. Verify the installation steps Create symbolic links (symlinks)  
 C. Ensure that the cataiog_backup_using_backint SAP HANA parameter is set to true Ensure that the data_backup_parameter_file and log_backup_parameter_file parameters have the correct path location in the global ini file   
D.  Add the SAP HANA system to SAP HANA Studio Select multiple container mode and then try to initiate the backup again  

Show / Hide Answer

---

<1234>

---

Download All 65 Questions Check Customers Feedbacks